COOKIES:
We use cookies to improve your user experience and to study how our website is used.
By continuing to browse the site you are agreeing to our use of cookies. For further information click here
TM3-R Mixing Unit - Pre-assembled regulation group (thermostaticorclimaticelectronic),forlow
temperature heating systems completewithbracketsforinstallationon wall
or in Metalbox (for 120 mm brick thickness)
1 Nr. 1 flow bar for floor heating system with flow meter;
2 Nr. 1 return bar for floor heating system set up to take
thermoelectric heads (where required);
3 Nr. 2 brackets for fixing manifolds;
4 Housing for thermostat safety probe;
5 Nr. 1 mixing valve thread M30x1,5 set up to thermoelectric
head with immersion probe from 20 to 65 °C (where required) electric
servomotor (not supplied);
6 Nr. 1 adjusting valve and by-pass (fixed-point adjustment) -
nr. 1 housing for return probe (climatic regulation);
7 Nr. 1 Wilo Yonos PARA RS 25/6 circulator pump with cable
(tripolar cable L = 1000 mm)
8 Nr. 1 housing for temperature flow probe;
9 Nr. 1 control thermometer from 0 to 80 °C;
10 Nr. 1 automatic bleed valve 1/2";
11 Nr. 1 thermostatic head with immersion probe from 20 to 65 °C
(fixed-point adjustment)
12 Nr. 1 check valve (not shown in the figure)
13 Nr. 2 fill and discharge adjustable bibcocks with safety plug
Technical data
Max temperature for primary circuit: 90 °C
Max operating pressure: 6 bar
ΔP max for primary circuit: 1 bar
Secondary range: 20 - 65 °C (fixed-point regulation)
Thermal power exchangeable ΔT 7°C, ΔP useful 0,25 bar
- Fixed-point regulation: 10 kW by-pass position 0
- Fixed-point regulation: 12.5 kW by-pass position 5
Pressure drop with by-pass valve position 5: Kvmax=4,8
Mixing valve pressure drop (climatic regulation): Kv 4
Thermometer scale: 0 - 80 °C
Head threads of Mixing group: 1” Female
Head threads of Topway manifolds: G 1" Female
Topway manifolds takeoffs threads: 24x19 tekeoffs 50 mm
Wilo Yonos Para RS 25/6 circulator pump
Connections - takeoffs: G1”1/2 - 130 mm
Rotation speed: 800 - 4250 rpm
Fluids that can be used:
Water cooling and heating - Water and glycol: max 1:1
Max static pressure: 6.2 m - Max delivery capacity: 3.3 m³/h
Max temperature water: 95 °C (at room temperature of 57 °C)
Max temperature water: 90 °C (at room temperature of 59 °C)
Max temperature water: 70 °C (at room temperature of 70 °C)
Electrical connection 1~230 V, 50/60 Hz
Protection class IPX 4D, of insulation F
Nominal motor power: 37 W Electrical comsumption from 1~230 V: 3 -
45 W
Power absorbed from 1~230V: 0.03 - 0.44 A
In confirm to
:
ErP Directive
EN61800-3
EN 61000-6-3 / EN 61000-6-4
EN 61000-6-2 / EN 61000-6-1
Products
TM3-R thermostatic with manifolds with flow meters (4 ℓ/min), low temperature
By accessing the website www.emmeti.comexclusively owned by Emmeti Spa,
the system only uses so-called “session cookies” or “browsing cookies” (i.e. temporary cookies of a technical nature.)
Their use is strictly related to the optimisation of website use in order to guarantee improved browsing of the website.
Their use is only intended for the transmission of communication on the net or as strictly necessary for the provider
(third party other than Emmeti) to supply a service requested by the user.
While browsing "www.emmeti.com" the so-called “persistent cookies”
are not used, IP addresses are not tracked and no other similar technologies of continuous users tracking
or user profiling are adopted by the system.