Registration

 
 
Province
 
State
 
 
 
 
 
Profession
 
 
 
Login
 
Recover password
 

Accumulation boilers

Accumulation and storage boilers for domestic and heating water

Characteristics
 
Construction
Emmeti accumulation boilers are manufactured in carbon steel S235JR with bottom surface rounded through deep-drawing.
The tanks are assembled with precision automatic equipment, and welded with continuous thread in Argon atmosphere and CO2 with "head" coupling.
Insulation dark grey colour.

Technical data
For enamelled boilers with storage tank (organic enamelling):
- maximum operating pressure 6 bar
- maximum continuous operating temperature: 70 °C (95 °C peak for max 20 hours per year)

Glazed boilers with storage tank (inorganic enamelling):
- maximum operating temperature 10 bar (8 bar for 1500 and 2000 litres models)
- maximum continuous operating temperature: 95 °C

Conformity
Emmeti accumulation boilers, accumulation tanks and heat exchangers are in accordance with directive PED 97/23/CE "Pressure equipment" in application of art. 3 codicil 3 of the above mentioned directive, to be used with warm or cool water.

Resistance to corrosion
The protection against corrosion and suitability for human water consumption, are obtained with:
- vitrified tanks: treatment of inorganic glazing (vitrification) as required by the applicable regulations (DIN 4753-3 and UNI 10025);
- enameled tanks: organic enamelling (treatment with thermosetting resins).

The insertion of Boguard electronic anode (1/2 "M) provides further protection of metal surfaces.

Note:
To guarantee the product for a proper corrosion protection, check or replace every 6 months the magnesium anode where expected (for example Tank in Tank).

To prevent the drilling of the boiler, it is to avoid the presence of stray currents from external parties.
In this sense, provide the connection with appropriate dielectric joints.
In the case of boiler equipped with a magnesium anode, prepare the grounding circuit to earth ground and such as to not itself determine which inputs of eddy current towards the metallic mass of the boiler.

The warranty of sanitary boilers is bound bu the value of the electrical conductivity of the water that must not be less than 150 µS or superior at 1000 µS.

The failure to comply of the prescriptions, It will void the product warranty.

Suitable for drink water (only for domestic water models)
5 years warranty on boiler

Products
 
 
Euro V vitrified storage boiler for domestic water with fixed exchanger
Euro V vitrified storage boiler for domestic water with fixed exchanger
 
HE2V vitrified storage boiler for sanitary water
HE2V vitrified storage boiler for sanitary water
 
Comfort V vitrified storage boiler for domestic water (without heat exchangers)
Comfort V vitrified storage boiler for domestic water (without heat exchangers)
 
Comfort S enamelled storage boiler for domestic water (without heat exchengers)
Comfort S enamelled storage boiler for domestic water (without heat exchengers)
 
Vitrified accumulation tanks for domestic water (without heat exchangers)
Vitrified accumulation tanks for domestic water (without heat exchangers)
 
Coils kit LN in finned copper for Comfort V boilers
Coils kit LN in finned copper for Comfort V boilers
 
Coil kit LS for HE2V, HEVS, Euro V, Euro HPV, HYBV boilers
Coil kit LS for HE2V, HEVS, Euro V, Euro HPV, HYBV boilers
 
Predisposition kit for electric resistance 1" 1/2 for HE2V, HEVS, Euro V, boilers
Predisposition kit for electric resistance 1" 1/2 for HE2V, HEVS, Euro V, boilers
 
Tank in Tank combinated tank with fixed exchanger
Tank in Tank combinated tank with fixed exchanger
 
Tank in Tank combinated tank with two fixed exchangers
Tank in Tank combinated tank with two fixed exchangers
 
Puffer accumulation tanks for heating water
Puffer accumulation tanks for heating water
 
Puffer accumulation tanks with exchanger for heating water
Puffer accumulation tanks with exchanger for heating water
 
Comfort enamelled storage boiler for domestic water
Comfort enamelled storage boiler for domestic water
 
Accumulation tanks for domestic water (without heat exchangers)
Accumulation tanks for domestic water (without heat exchangers)
 
Heat exchangers with assembly kit (complete with flange, gasket, fittings, thermostat and ...
Heat exchangers with assembly kit (complete with flange, gasket, fittings, thermostat and ...
 
 

EMMETI HOME

Discover our systems

 
 

NEWSLETTER

Launches Newsletter Be updated on events, offers and new products Emmeti !
 

AFTER SALE SERVICE

Launches Assistenza Find the Emmeti after sale service nearest to you !