Dehumidifier for recessed ceiling mounting EPD 26-4SI
The machine is made entirely in galvanised sheet. All of the heat exchangers are made in copper-aluminium with additional hydrophilic treatment on the first two coils; this prevents the formation of drops of water on the same. By making the condensate run into the tray, which has a steep slope and is made in plastic, in turn it expels all of the water, thus preventing stagnations that can lead to the formation of bacteria and mucilage. The circulation of air is forced by a silent centrifugal fan. Particular attention has been paid to the cooling circuit, characterised by a high efficiency hermetic reciprocating compressor.
A capillary expansion device joined to a series of set-ups aim at reducing noise problems linked to the circulation of the freon and, even if small, vibrations of the compressor. The machine is managed by a dedicated circuit board fitted with a latest generation microprocessor and able to optimize dehumidifier operation.
Refrigerant R134A: 0,24 kg - Static pressure (max): 65 Pa - Inlet air temperature (min-max): 15 - 32 °C - Water flow (nom): 220 l/h - Water pressure drop (nom): 11 kPa - Inlet water temperature (min-max): 15 - 19 °C - Power supply: 230 V~/ 50 Hz - Dimensions (WxHxD mm): 645 x 630 x 247 - Net weight: 29 kg
(*) Inlet air condition 26 °C 65% RH, inlet water temperature15 °C, nominal airflow rate
Discover our systems