Single Inverter standing floor air conditioner EITH
Operation and technical characteristics:
-DRY/Dehumidification: To reduce relative humidity without turning the temperature down too much.
-AUTO/Automatic mode: It chooses functioning mode according to the set parameters to allow an ideal and comfortable condition to the ambience.
-Ventilation mode: Three speeds available plus automatic.
-Remote control: Liquid crystal display (LCD) with clear indication of functions.
-TIMER/Timer setting: To preset the startup and the shutdown of the air conditioner.
-SLEEP/Night-time setting: To maintain optimum temperature during sleep periods.
-AIRSWING/Manual movement of vertical deflector: To manually adjust air flux vertical.
-AUTODIAGNOSIS/Maintenance: It indicates any functioning problems.
-AUTORESTART/Automatic restarting: To automatically restart the system after an interruption of the power supply.
-Anti-dust filter: The indoor unit is equipped with a purification filter of the dust.
-Key Lock of the remote control: To block all the remote control functions
-Double temperature range: It allows to set/visualize the temperature in °C or °F.
-Soft mode: To achieve conditions of lower noisiness.
-Compressor maintenance: To ensure a longer compressor lifetime, we have equipped the compressor with a start and stop controller. Waiting time between stop and start is three minutes.
-Manual movement of horizontal deflector: To manually adjust air flux horizontally.
-Power mode: To obtain quick Cooling or Heating.
-On-off card: Card to activate the functioning of the indoor unit.
-Comfortable 3D air jet: 3D air jet is able to distribute the air flow both horizontally and vertically offering in this way a natural wind sensation.
The indoor units (IU) above must be combined with the following outdoor units (OU):
EITH-4813 (IU) : EOSH-4813 (OU)
EITH-6013 (IU) : EOSH-6013 (OU)
Refrigerant R410A (GWP = 2088) - Power supply (V-ph-Hz): 230-1-50 (IU), 400-3-50 (OU)
Performance data refer to the combination of the indoor unit (IU) with its outdoor unit (OU)
(*) Cooling standard design/nominal conditions: internal temperature = 27(19) °C; external temperature = 35 °C
(**) Heating standard nominal conditions: internal temperature = 20 °C; external temperature = 7 °C